What are the simple ways of connecting high temperature alumina ceramic roller?

Time:2018/5/30 17:29:19 Click on:

There are many ways to connect the high temperature alumina ceramic roller, according to the specific circumstances of the high temperature alumina ceramic roller, the following describes a simple connection, hoping to bring you a positive impact.

1, to do is to break the pipe, must first cut off the pipe in accordance with the required length, and then we have to pay attention to when the pipe is broken, the force is too large, otherwise it may lead to its ceramic riser and out-of-round; The next step is to remove the burrs. When the pipe is cut off, the burrs must be removed, otherwise the seals will be cut.

2、Scribe mark, in order to make the alumina high temperature alumina ceramic roller can be fully inserted into the socket of the pipe fitting, at this time, we must mark the inserting length at the pipe end; then the seal ring should be correctly installed in our ceramic. In the groove of the liquid tube. For this, we need to insert the tube into the tube socket and wait for crimping.

3, for the alumina high temperature alumina ceramic roller connection we have to do is crimping and inspection. When crimping, pay attention to the convex part of the tube, and place it in the concave groove of the mold. For the jaw and tube axis, it must be vertical.

In addition, after the above steps are completed, we must pay attention to the use of special gauges to check the size of our crimps.

alumina ceramic roller ， fused silica roller for tempering furnace ，high temperature alumina ceramic roller ，Company website： http://www.ceramicroller.net/ 

• Previous：Finishing Of Alumina Ceramic Roller Surface Finish And Strengthening Of Its Mechanical Strength
• Next：Fused Silica Roller For Tempering Furnace Packaging And Transportation