How To Clean The Quartz Fused Silica Roller For Tempering Furnace?

Time:2018/7/18 17:12:28 Click on:

Today, Xiaobian introduces to you, there are several ways to clean the quartz fused silica roller for tempering furnace, and you can also clean the quartz fused silica roller for tempering furnace and the regular maintenance quartz fused silica roller for tempering furnace in daily life.

Note the following points for the cleaning treatment of quartz ceramic rolls.

1. Solvent cleaning: Most of the solvent is not obvious for the remnants of ink and UV ink solidified in the quartz fused silica roller for tempering furnace mesh. The solvent itself has little effect on the environment and human body.

2, mechanical dust cleaning: mainly rely on high-pressure jet modified baking soda powder, (also used plastic particles, can be reused) to remove the ink residue in the cell. This type of equipment should be of a fully enclosed structure. For example, the use of open-type work, despite the use of water curtains as a protective layer, water and dust splash is still a headache. The consumption of special baking soda powder in the process of cleaning quartz ceramic rolls is quite a lot.

3. Ultrasonic cleaning: The ultrasonic generator is used, and the special cleaning liquid is added to place the quartz fused silica roller for tempering furnace in the cleaning liquid, and the ink residue in the cell is cleaned under the action of ultrasonic vibration. Due to the addition of cleaning fluid in the cleaning tank, different types of inks need to be replaced with different types of cleaning fluids, and the cleaning fluid is supplied by the supplier, which is the most inconvenient choice. Ultrasonic vibration is slower in the entire cleaning process and the cleaning time is long.

4. Ceramic anilox roller cleaning agent: This is a new cleaning agent developed for the solidified layer of ink and UV ink in the cell. It is characterized by its ease of use and remarkable cleaning effect. It does not require any auxiliary settings and can quickly remove ink residue from the cells. The user only needs to apply the paste-like cleaning agent on the surface of the quartz fused silica roller for tempering furnace. After ten minutes, it is brushed with a special stainless steel brush for the anilox roller, and then rinsed with water, and the entire ceramic anilox roller is cleaned. . Compared with several foreign cleaning agents available on the market, the new cleaning agent is undoubtedly low in cost, fast in cleaning and good in effect. At present, the new cleaning agent has been widely used in the flexographic printing factory, and the cleaning of the quartz fused silica roller for tempering furnace on the multi-color flexo printing machine flexo printing machine and the carton printing machine can also obtain satisfactory results.

The above are several ways to clean the quartz fused silica roller for tempering furnace, I hope to be helpful to everyone.

alumina ceramic roller ， fused silica roller for tempering furnace ，high temperature alumina ceramic roller ，Company website： http://www.ceramicroller.net/ 

• Previous：Factors Affecting The Thermal Stability Of High Temperature Alumina Ceramic Rollers
• Next：Is The Alumina Ceramic Roller Suitable For The Decoration Industry?