Do You Know How To Maintain High Temperature Alumina Ceramic Collers?

Time:2018/9/25 17:16:25 Click on:

It is very important about the performance of high temperature alumina ceramic rollers. The roller table can be cleaned with a 3M soft synthetic scouring pad dampened with pure water. However, it is forbidden to use any soap or detergent! In order to avoid the generation of water vapor, the roller should be dried before heating, and the spare roller should be placed in a ventilated and dry place. Otherwise, if it is stored for a long time, the roller path may produce mildew spots. (Mold spots are organic microorganisms, which will naturally disappear at high temperatures. ). If there is sticking on the roller table, it is recommended to sand the high temperature alumina high temperature alumina high temperature alumina ceramic rollerer with sandpaper and use any adhesive cloth to remove any fine dust and debris.

Dust in the factory must be strictly controlled, including debris that has fallen off the insulation material in the furnace and the insulation material on the furnace wall. The debris, dust, and materials used to separate the glass must be completely removed before entering the furnace. The effective use of glass cleaning equipment for high temperature alumina ceramic rollers, as well as the recommended operating and maintenance schedules, is also important for the quality of high temperature alumina high temperature alumina high temperature alumina ceramic rollerer surfaces. We also recommend daily cleaning of exposed transfer rollers to avoid dust build-up. The printing ink should not be too much, and the edge of the printed glass must be cleaned so as not to flow to the surface of the roller after heating, and finally to the surface of the glass.

Good pre-treatment is also very important, this includes complete edging, smooth edges, and no debris in the protruding parts of the glass, which would otherwise cause the glass to burst during production. Glass dust and debris on the high temperature alumina high temperature alumina high temperature alumina ceramic rollerer surface are removed by the glass. Good housekeeping and operation can bring the following benefits: reduced number of high temperature alumina high temperature alumina high temperature alumina ceramic rollerer maintenance and cleaning, stable glass quality, and corresponding increase in production capacity.

alumina ceramic roller ， fused silica roller for tempering furnace ，high temperature alumina ceramic roller ，Company website： http://www.ceramicroller.net/ 

• Previous：Three Ways Of Wearing Fused Silica Roller For Tempering Furnace Elbow
• Next：How Do Alumina Ceramic Rollers Be Sintered?